Product Details
Center Bundle heavy Armored Optical Fiber Cable
Introduction
■ The fibers are placed in a loose tube made of PBT. The tube
is filled with a water-resistant filling compound. The tube is
wrapped with a layer of PSP longitudinally. Between the PSP
and the loose tube water-blocking material is applied to keep
the cable compact and watertight. Two parallel steel wires are
placed at the two sides of the steel tape, over which a thin PE
inner sheath is applied. After the PSP is longitudinally applied
over the inner sheath, the cable is completed with a PE outer
sheath.
G652D fiber information
■ Mode field diameter (1310nm):9.2μm±0.4μm.
■ Mode field diameter (1550nm):10.4μm±0.8μm.
■ Cladding diameter:125μm±1.0μm.
■ Coating diameter:245μm±7μm.
■ Cut off wavelength of cabled fiber (λcc): ≤1260μm
■ Attenuation at 1310nm:≤0.35dB/km.
■ Attenuation at 1550nm:≤0.21dB/km.
■ Bending loss at 1550nm (100 turns, 30mm radius):≤0.05dB.
■ Dispersion in the range 1288 to 1339nm:≤3.5ps/(nm·km).
■ Dispersion at 1550nm:≤18ps/(nm·km).
■ Dispersion slope at zero dispersion wavelength:≤0.092ps/(nm2·km).